SCOTCHMAN IRONWORKER MACHINES
Scotchman ironworkers are built right here in the USA! Their ironworkers offer rugged, heavy duty, reliable service for very large shops to the smallest fabrication shop. Scotchman is well known for its quick tool change, multiple functions, and the ease of use. An ironworker is a must for the tool room, weld shop, structural fabricator, ornamental iron shop, to the general fabricator. Call us today to receive a complete video CD or to set up an on-site demo with one of our traveling demonstration trucks.
6509-24M - STANDARD FEATURES
- Available in 40, 45, 50, 65, 90, and 120 ton. Shown is a 65 ton.
- 65 ton punch station (1-1/16" in 3/4")
- Keyed punch ram for safety
- 9" throat depth
- Punch gauging table w/fence and scale
- Die holder complete with 2" die insert
- punch nut with wrench and stripper
- One round punch & die: Max. Dia. 1-1/4"
- Punch jog control
- Adjustable electric stroke control with scale
- Electric remote foot pedal
- 24" flat bar shear with 4-way reversible
- blade (1" x 6", 1/4" x 24")
- Angle shear capacity
- 6" x 6" x 3/8" and 5" x 5" x 1/2"
- Tool table work area
- Two-stage hydraulic pump
- Electrical box supplied with emergency palm button and lock-out tag-out accommodations
- 230/460 volt / 3 Phase electrics (must specify voltage)
- All guards necessary to comply with
- ANSI B 11-5 Standards
- Fork lift accommodations
- One-year warranty
- Made in USA
DO 8514-20M - STANDARD FEATURES
- Dual operator allows for two operators to work at the same time at full capacity
- 85 ton punch station (1-1/16" in 1")
- Keyed punch ram for positive and safe punch alignment
- 14" throat depth
- Punch gauging table with fence and scale
- Die holder complete with 2" die insert
- for #82 dies, punch nut with wrench
- adjustable swing-away stripper
- One round punch & die: max. diameter 1-1/4"
- Punch jog control
- Two adjustable electric stroke controls with scale
- Two electric remote foot pedals
- Two 2-stage hydraulic pumps
- Two valves
- 6" x 6" x 1/2" slug-less angle shear
- Built-in rectangle notcher: 2" x 4" x 1/2"
- Notcher station can be converted to open end brake
- 20" flat bar shear with 4-way reversible
- blade (1" x 6", 3/8" x 24")
- Low rake angle for minimal distortion
- Shear table with scale and miter fence
- Rod shear: 1/2", 3/4", 1", 1-1/2" round
- and 1-1/2" square
- Slug receptacles
- Electrical box supplied with emergency palm button and lock-out tag-out accommodations
- 230 or 460 volt / 3 ph electrics
- All guards necessary to comply with
- ANSI B 11-5 Standards
- Fork lift accommodations
- One year warranty
FI 8510 20M - STANDARD FEATURES
- 85 Ton Punch Station (1-1/16" in 1")
- Keyed Punch Ram for Safety
- 10" Throat Depth
- Die Holder Complete with 2" Die Insert
- Punch Nut with Wrench
- Adjustable Swing-Away Stripper
- One Round Punch & Die: Max. Dia. 1-1/4"
- Punch Jog Control
- Adjustable Electric Stroke Control with Scale
- Electric Remote Foot Pedal
- Angle Shear Capacity 6" x 6" x 1/2" Slug-less Angle Shear
- 20" Flat Bar Shear with 4-Way Reversible Blade (1" x 12", 3/4" x 20")
- Rod Shear Capacity 1-1/2" Round, 1-1/4" Square
- Rectangle Notcher Capacity 3" x 5" x 1/2"
- Two-Stage Hydraulic Pump
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230/460 Volt /3 Phase Electrics (must specify voltage)
- All Guards Necessary to Comply with ANSI B 11-5 Standards
- Forklift Accommodations
- One Year Warranty
- Made in USA
50514-CM - STANDARD FEATURES
- 50 Ton Punch Station (1-1/4" in 1/2")
- Keyed Punch Ram for Safety
- 6" Throat Depth
- 2" Die Holder
- Punch Nut with Wrench & Stripper
- One Round Punch & Die: Max. Dia. 1"
- Adjustable Stroke Control
- Angle Shear Capacity 4" x 4" x 3/8" at 90° and 2" x 2" x 3/8" at 45°
- 14" Flat Bar Shear with 4-Way Reversible Blade (3/4" x 4", 1/2" x 8", 3/8" x 10" 1/4" x 14")
- Rectangle Notcher - 2-1/2" x 2-3/4" x 3/8"
- Tool Table Work Area
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230/460 volt / 3 Phase Electrics (must specify voltage)
- All Guards Necessary to Comply with ANSI B 11-5 Standards
- Forklift Accommodations
- Warranty: Three Years
- Made in USA
5014-TM - STANDARD FEATURES
- 50 ton punch station with 3-station revolving turret (1-1/4" in 1/2")
- Keyed punch ram for safety
- 4" throat depth
- Three 2" die holders, three punch nuts with wrench and three strippers
- One round punch & die: Max. Dia. 1"
- Adjustable stroke control
- Angle shear 4" x 4" x 3/8" and
- 2" x 2" x 1/4" at 45 degrees
- 14" flat bar shear with 4-way reversible
- blade (3/4" x 4", 1/4" x 14")
- Low rake angle for minimal distortion
- Rectangular notcher, 2-1/2" x 3" x 5/16"
- Tool table work area
- Electrical box supplied with emergency palm button and lock-out tag-out accommodations
- 230/460 volt / 3 phase electrics (must specify voltage)
- All guards necessary to comply with
- ANSI B 11-5 Standards
- Fork lift accommodations
- One-year warranty
- Made in USA